Drawing (planning)
Note: The plan shows the main linear dimensions and functional areas (terrace, living area, bathroom).
Technical and Commercial Description of the Modular House
CATANIA • F40 pro • 74.34 m²
Section | Parameter | Value / description |
Summary technical data | Model | F40 pro |
Summary technical data | Expanded dimensions | 11,800 × 6,300 × 2,480 mm |
Summary technical data | Interior dimensions | 11,640 × 6,140 × 2,240 mm |
Summary technical data | Transport dimensions | 11,800 × 2,200 × 2,480 mm |
Summary technical data | Area | 74.34 m² |
Summary technical data | Layout | 3 bedrooms, living room, 1 bathroom |
Summary technical data | Capacity | 4–8 people |
Summary technical data | Rated power | 12 kW |
Summary technical data | Weight | Approximately 7 tonnes |
General description | Purpose and format | CATANIA F40 pro is a foldable modular house with an area of 74.34 m², designed for permanent or seasonal family living or accommodation for 4–8 guests. In transport mode, the unit folds to a width of 2.2 m and expands to 6.3 m after installation. The design combines the mobility of a factory-built module with the floor area of a complete small house. |
General description | Layout and supply scope | The layout includes three separate bedrooms, a shared living room and one fully equipped bathroom. The house is supplied with a load-bearing galvanized frame, insulated wall and roof panels, windows and doors, flooring, an electrical system and a basic plumbing package. |
Load-bearing structure and corrosion protection | Main frame | Galvanized steel profiles and formed components. Longitudinal upper and lower side beams: 80 × 140 × 5.0 mm square galvanized tube; secondary upper and lower beams: 40 × 60 × 1.4 mm tube; upper and lower end beams and posts: 3.0 mm thick galvanized formed components. |
Load-bearing structure and corrosion protection | Lifting and folding components | Galvanized lifting nodes measuring 210 × 150 × 160 mm, made from 6 mm thick steel. Folding side frames: 40 × 80 × 1.2 mm P-shaped profile, 40 × 80 × 1.4 mm and 60 × 80 × 1.4 mm square tubes, and 130 mm wide galvanized hinges. |
Load-bearing structure and corrosion protection | Finish and colour | Electrostatic powder coating in RAL 7016 grey. The main frame can also be supplied in matt grey, black or white. |
Roof, ceiling and waterproofing | Roof and ceiling panels | The external roof panel is a type 1150 steel sandwich sheet with an overall thickness of 50 mm, double-sided 0.35 mm metal facings and EPS thermal insulation. The internal ceiling surface and the upper panels of the unfolding sections are type 500 integrated EPS panels, 50 mm thick, with a carbon-look decorative finish. |
Roof, ceiling and waterproofing | Waterproofing | Sealing compounds, butyl tape and a three-layer Oriental Yuhong coating. The stated waterproofing warranty is 5 years. |
Walls, partitions and thermal insulation | Panels and cladding | The side, front and rear exterior walls and the internal partitions are made of type 500 integrated EPS panels, 50 mm thick, with a carbon-look decorative finish. The exterior cladding is a 16 mm metal PU composite panel. |
Walls, partitions and thermal insulation | Performance data | The galvanized frame, EPS panels and exterior composite cladding form a lightweight, fast-to-install enclosure system. Thermal conductivity, fire-resistance and sound-insulation ratings are not stated in the source specification and must be confirmed by separate manufacturer certificates. |
Floors and interior surfaces | Living areas | 18 mm bamboo plywood subfloor with 2 mm PVC flooring. |
Floors and interior surfaces | Bathroom | 18 mm fibre-cement board with 400 × 400 mm floor tiles. |
Floors and interior surfaces | Optional flooring | The standard PVC flooring can be replaced with more wear-resistant SPC flooring. |
Windows and doors | Windows | Six top-hung windows made of thermally broken aluminium profiles, size 850 × 900 mm, grey finish. A separate 400 × 400 mm window of the same type is installed in the bathroom. |
Windows and doors | Entrance and interior doors | Main entrance: grey double-leaf thermally broken aluminium door. Interior doors: white steel doors, 840 × 2,035 mm, without thresholds. |
Windows and doors | Bathroom door | Glass door in a titanium-magnesium aluminium-alloy frame, size 700 × 1,900 mm. |
Electrical system and lighting | Power and distribution board | Total rated power: 12 kW. Distribution board: one 40 A circuit breaker, two 25 A protection devices, two 20 A protection devices and one 10 A circuit breaker. |
Electrical system and lighting | Cable sizes | Incoming supply: 6 mm²; air-conditioner circuit: 4 mm²; socket circuits: 2.5 mm²; lighting: 1.5 mm². |
Electrical system and lighting | Sockets, switches and lighting | Low-profile sockets and switches to the applicable national standard, 300 × 300 mm flat luminaires in the side sections and a moisture-resistant ceiling light. |
Bathroom and water supply | Standard bathroom | One ready-made integrated bathroom with a sliding glass partition, toilet, vanity with washbasin and mirrored cabinet, extractor fan, shower area, mixers and 400 × 400 mm floor tiles. |
Bathroom and water supply | Water supply and connections | The system is stated to comply with the manufacturer’s national standard. Pipe diameters and materials, connection locations, sewer outlet parameters and external utility requirements are not specified and must be agreed before ordering. |
Accessories and installation materials | Included materials | Aluminium floor skirting, PVC corner trims, waterproofing tape, structural sealant and a sealant gun. |
Accessories and installation materials | Purpose | The materials are intended for final sealing and completion of the interior finish after the module is unfolded and installed. |
Optional extras | Kitchen | L-shaped kitchen units, sink and mixer tap. |
Optional extras | Pitched roof | Additional pitched roof made of 50 mm EPS panels. |
Optional extras | Terrace | Covered terrace measuring 6,300 × 2,000 mm. |
Optional extras | Air conditioner | One wall-mounted 1.5P air conditioner. |
Optional extras | Furniture | Two 1.5 m beds with mattresses, one 1.2 m bed with mattress, a two-seat sofa, coffee table, dining table and 4 chairs. Stated price: 2,000 (currency not specified in the source). |
Optional extras | SPC flooring | Replacement of the standard PVC flooring with SPC. |
Optional extras | Additional room | Installation of an additional wall and steel door. |
Optional extras | Additional bathroom | Second bathroom with partition, toilet, washbasin, shower and mixers. |
Optional extras | Rain gutter | Aluminium rainwater gutter. |
Optional extras | Glass wall | Single glass wall on each selected side. |
Optional extras | Utility-system adaptation | Electrical and water-supply systems adapted to Australian, EU or US standards. |
